Gas ducted heater not working: what to check
A few safe checks before you call, and the signs that need a qualified technician.
Last updated . Written by the Facilities Cooling and Heating team, Campbellfield.
Safety first
If you smell gas, don’t use switches or flames near the heater. Turn the gas off at the meter, open doors and windows, and call your gas distributor’s emergency line. Never remove the heater’s panels yourself.
Safe checks
- Check the thermostat or controller has power, is set to heat and the set temperature is above room temperature.
- Check the gas is on at the meter and other gas appliances work.
- Check the heater’s power point (usually in the roof space or outside next to the unit) is switched on.
- Check the return air filter. A blocked filter restricts airflow and can make the heater overheat and shut down.
- Note any fault code on the controller.
When to call us
- The heater starts then shuts off, or keeps cycling.
- It blows cold air or the fan runs without heat.
- Unusual noises, smells or soot marks.
- It hasn’t been serviced in a few years. Service before winter is best.
Repair or replace?
It depends on the heater’s age, condition and the cost of repair. If you’re replacing it anyway, it may be worth looking at ducted reverse cycle, which heats and cools and may be eligible for a VEU discount.
Book a service or get a free quote
Call us Mon–Fri 7am–5pm or send an enquiry with your suburb and what’s happening with your system.
